Welcome to our new website!

Product details

Product description and measurements

Utahraptor ostrommaysi was a gigantic dromaeosaurid theropod dinosaur from the Early Cretaceous of North America, known mainly from remains recovered from the Yellow Cat Member of the Cedar Mountain Formation in Grand County, Utah, United States. It lived approximately 135–125 million years ago and represents the largest well-documented dromaeosaurid known. It was formally described in 1993 and quickly became one of Utah’s most iconic dinosaurs because of its enormous size, robust build and spectacular sickle-shaped claw on the second toe.

Taxonomically, Utahraptor belongs to Dromaeosauridae, the group of maniraptoran theropods popularly known as “raptors”. Within this lineage, it is placed among the more robustly built dromaeosaurines. Its anatomy demonstrates that the typical dromaeosaurid body plan — bipedal body, long tail, functional forelimbs and a second toe equipped with a large recurved claw — could reach dimensions far greater than those of genera such as Velociraptor or Deinonychus.

The correct specific name is Utahraptor ostrommaysi, the spelling used in the original 1993 description. The form ostrommaysorum later appeared as an emendation intended to reflect that the epithet honours John Ostrom and Chris Mays, but this change is not required under zoological nomenclature rules, so ostrommaysi should be retained as the valid original spelling.

From a morphometric perspective, Utahraptor was a large predator. Adults are generally reconstructed at approximately 5.5–7 metres in body length, with a mass of around 350–500 kilograms, although estimates vary depending on the specimen and method used. Its body was considerably more robust than that of smaller dromaeosaurids, with a powerful pelvis, muscular torso and thick hind limbs capable of supporting substantial body mass.

The hind limbs formed one of its main attack systems. The second toe bore an enormous recurved ungual claw, whose keratinous sheath would have increased its length even further in life. Rather than functioning only as a blade for producing long slashing wounds, this structure probably served to grip, pierce and control prey while the animal simultaneously used its jaws and forelimbs.

The arms were long and functional, ending in hands with three fingers and curved claws. These limbs would have played an active role in capturing and restraining prey. The combination of grasping hands, large pedal claws and powerful body musculature suggests a predator capable of immobilising sizeable animals through the coordinated use of several parts of the body.

The skull was proportionally large and robust for a dromaeosaurid. Although cranial material was scarce for many years, the progressive preparation of specimens from the so-called Utahraptor Megablock has provided new elements that allow more accurate reconstruction. The teeth were laterally compressed, recurved and serrated, well suited for piercing and cutting tissue.

The overall build of Utahraptor indicates that it was not simply a gigantic and extremely fast version of Velociraptor. Its body mass, robust limbs and powerful torso suggest a predatory strategy based on short attacks, physical strength and prey control. It probably combined ambushes or brief bursts of acceleration with the use of its enormous claws and jaws to bring down or restrain herbivores.

As a member of Maniraptora and Dromaeosauridae, a modern reconstruction of Utahraptor ostrommaysi should include plumage. Although no direct feather impressions are known for the genus, its phylogenetic position and the presence of feathers in related dromaeosaurids make extensive body feathering highly probable, possibly accompanied by well-developed pennaceous feathers on the forelimbs and tail. The exact density of plumage in an animal of this size remains uncertain.

Utahraptor inhabited continental environments of the Yellow Cat Member of the Cedar Mountain Formation, characterised by floodplains, river systems, lakes and relatively dry or seasonal areas. In these ecosystems it lived alongside armoured dinosaurs such as Gastonia, large iguanodontian herbivores, sauropods and other theropods. Its enormous size placed it among the principal predators of these Early Cretaceous communities.

One of the most important discoveries associated with the species is the so-called Utahraptor Megablock, or Stikes Quarry, a huge block of rock containing numerous dromaeosaurid skeletons of different ages. It has been proposed that these animals became trapped in water-saturated sediment or a natural trap. The presence of several individuals together has generated hypotheses about social behaviour, but does not by itself constitute definitive evidence of cooperative pack hunting.

Incredible museum-quality replicas with a high degree of scientific accuracy, produced in high-definition resin from a high-resolution 3D model.

If you require other scales, please do not hesitate to contact us at info@dinosauriacreatures.com

Approximate Utahraptor Replica Dimensions

  • 1:6 Scale — Pre-assembled Assembly Kit, solid parts
    • Length: 950 mm
    • Height: 495 mm
    • Width: 400 mm
    • Snout-to-tail length: 1167 mm
    • Support included
    • Base not included
Information about aftershocks

Collector's item ; Hyper-realistic replica, highly detailed and with a high degree of scientific precision.

Made to scale, prototyped in resin and with a scenic base in most of the models offered. If you like miniatures, both for collecting and for painting, we offer you a wide variety of scale replicas; All of them related to dinosaurs, extinct prehistoric fauna and current fauna.

So if you love dinosaurs and animals as much as we do, this is your favorite store to collect and paint them :)

We are authorized distributors of all the replicas and figures we offer. We use 3D printers with 8K - 14K resolution, and high-quality resins with additives to improve hardness and flexibility, thus offering replicas of impeccable quality.

Different scales will be used to make the replicas (depending on the size of the species), although we are open to making other suggested scales upon request as long as they fit in our printing trays, for which you will have to contact us via email and request the required size.

Replicas are supplied with the option of airbrush priming in dark grey. If you require another colour, please let us know which one you prefer in the box with special instructions for the seller. Without priming, we do not guarantee that the resin will accept paint.
We also offer the option of choosing a professionally painted replica, which is agreed upon throughout its development with the painter, through a private chat available.

Complete replica (one piece): We supply complete replicas in those models that are small, and models that are medium, large or not very bulky, will have the prerogative of being presented as a complete replica or assembly kit as the case may be.
Complete replicas will be supplied separately from their base.

Replica assembly kit: We supply replicas whose models are large, very large or bulky, only with this option.
The indicated replicas (generally composed of base, head, body and tail) will come prepared for the subsequent assembly that will be required by the client, by sanding, putty, adhesive or technique chosen by the client.

All replicas are thoroughly inspected before shipping and will be carefully packaged to prevent damage during transport.

Information about the models

The poses of the models aim to represent each character in the most scientifically viable way, thus revealing the life and customs of prehistoric and modern fauna.

Each character has its own personality and develops in different life scenarios; birth, adolescence and play, hunting, feeding, fighting, courtship, death and many other scenes from their daily life, always from the creative perspective of their designers.

Handmade

All orders are individually prepared on the cutter for subsequent prototyping, obtaining a resin part that will require post-processing by manual and ultrasonic cleaning, support removal, ultraviolet curing, labeling and packaging.

We are authorized distributors

We offer both our own physical replicas and those that have been modeled by many of the best 3D designers, in order to offer you the greatest possible variety.

Frequently Asked Questions

If you have any questions about products, orders or shipping, please read our FAQ page to learn more.

Didn't find your answer?

Do not hesitate to contact us